72V3690L15PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 128 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 32KX36 |
| Density | 1.1 Mb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V3690L15PF8 Overview
You will find FIFO memory chip in the TQFP package.The recommended mounting method for this FIFO products is Surface Mount .If the supply voltage is set to 3.3V , high efficiency can be achieved.I found that it has 128 terminations in FIFO means.The operation pins are 128 pins.In order for FIFO design to operate, a maximum current of 40mA is required.For FIFO's maximum efficiency, the supply voltage should be set to 3.3V .This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.A self-contained gadget is contained in FIFOs .The IC of the part is OTHER FIFO memory type.It is possible to operate the FIFO memory chip at very low supply voltages, such as 3.15V volts.A maximum supply voltage of 3.45V V can be handled by this FIFO memory chip.The FIFO memory IC has a total of 128 pins.When the frequency is set to 66.7MHz it can maintain good accuracy.It is recommended that the FIFO memory's maximum value be set to 66.7MHz .
72V3690L15PF8 Features
FIFOs category
Frequency at most
72V3690L15PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V3690L15PF8 FIFOs Memory applications.
- Consumer Systems
- Programmable Logic Controller
- Signal processing
- Measurement Equipment
- SPD for DDR3 Memory Modules
- Extended product-change notification
- Video
- Video Processing
- Look-up Tables
- MP3 Interface for Automobile
