72V3690L15PFI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 128 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 32KX36 |
| Density | 1.1 Mb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V3690L15PFI Overview
FIFO memory chip is included in the TQFP package.A Surface Mount mounting method is recommended.When the supply voltage is 3.3V there is the possibility of high efficiency.FIFO means contains a total of 128 terminations.As far as the operation pins are concerned, they are 128 pins.FIFO design requires a maximum current of 40mA to operate.A supply voltage of 3.3V is recommended for FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of -40°C degrees Celsius to ensure reliability.The stable operation is enabled by the memory logic's maximum operating temperature of 85°C °C.It is contained within FIFOs .The IC of the part is of the type OTHER FIFO .Low supply voltages, such as 3.15V V, may be required for operation.FIFO memory is capable of handling a maximum supply voltage of 3.45V volts.Approximately 128 pins are attached to it.In spite of the frequency 66.7MHz , it is capable of maintaining a good level of accuracy.During regular operation, 66.7MHz is the FIFO memory's maximum value.
72V3690L15PFI Features
FIFOs category
Frequency at most
72V3690L15PFI Applications
There are a lot of Integrated Device Technology (IDT) 72V3690L15PFI FIFOs Memory applications.
- Optical memories
- Switches
- Product traceability
- Event Recorder
- Game Consoles
- SPD for DDR3 Memory Modules
- Communications
- Microprogramming
- IP Radio
- Multimedia
