72V3690L6BBG8
| Parameters | |
|---|---|
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Package / Case | BGA |
| Number of Pins | 144 |
| Published | 2008 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 144 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Frequency | 166MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 144 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 166MHz |
| Access Time | 4 ns |
| Organization | 32KX36 |
| Density | 1.1 Mb |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 6 ns |
| Height Seated (Max) | 1.97mm |
| Length | 13mm |
| Width | 13mm |
| Thickness | 1.76mm |
72V3690L6BBG8 Overview
The BGA package contains FIFO memory chip.It is pointing in the direction of Surface Mount .When the supply voltage is 3.3V , high efficiency is possible.A total of 144 terminations can be found in FIFO means.There are 144 pins for operation.In order to operate FIFO design, a maximum current of 40mA is required.FIFO is recommended that the supply voltage be set to 3.3V in order to maximize efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.An operating temperature of 70°C °C is necessary for stable operation.There is a possibility that FIFO may operate at a very low supply voltage, such as 3.15V V.A maximum supply voltage of 3.45V volts can be handled by the FIFO memory chip.It consists of a total of 144 pins.A frequency of 166MHz is sufficient to maintain good accuracy.Normally, the FIFO memory's maximum value is 166MHz .
72V3690L6BBG8 Features
Frequency at most
72V3690L6BBG8 Applications
There are a lot of Integrated Device Technology (IDT) 72V3690L6BBG8 FIFOs Memory applications.
- Event Recorder
- Extended product-change notification
- A/D output buffers
- Switches
- Network bridges
- Microprogramming
- Digital buffering
- Rate buffers
- Character generators
- Networking
