72V3690L7-5PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 133.3MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 128 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 133.3MHz |
| Access Time | 5 ns |
| Organization | 32KX36 |
| Density | 1.1 Mb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V3690L7-5PF8 Overview
TQFP is a package that contains FIFO memory chip.Memory IC's recommended mounted way is Surface Mount .When the supply voltage is 3.3V there is the possibility of high efficiency.I found that it has 128 terminations in FIFO means.These are the 128 pins for operation.For its operation, 40mA is the maximum current required.For FIFO's maximum efficiency, the supply voltage should be set to 3.3V .At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.An operating temperature of 70°C °C is necessary for stable operation.The gadget in FIFOs is self-contained.It has a type OTHER FIFO memory IC.There is a possibility that FIFO may operate at a very low supply voltage, such as 3.15V V.A maximum voltage of 3.45V volts can be applied to FIFO memory.There are a total of 128 pins on this board.In the presence of a 133.3MHz frequency, it can maintain good accuracy.It is recommended that the FIFO memory's maximum value be set to 133.3MHz .
72V3690L7-5PF8 Features
FIFOs category
Frequency at most
72V3690L7-5PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V3690L7-5PF8 FIFOs Memory applications.
- Optical memories
- Computer networks
- Video time base correction
- Address mapping
- Tape controllers
- IP Camera Buffer
- IP Radio
- Transistors
- Multimedia
- Thermal Management for DDR3 Memory Modules
