72V801L10PFG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 256X9 |
| Density | 4.5 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | BI-DIRECTIONAL FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72V801L10PFG Overview
TQFP is a package that contains FIFO memory chip.Mounting it Surface Mount is recommended.When the supply voltage is 3.3V , high efficiency is possible.As a result of this, FIFO means contains 64 terminations.FIFO design has 64 operation pins.There is a maximum current requirement of 40mA for its operation.Set the supply voltage to 3.3V to ensure FIFO's maximum efficiency.During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.FIFOs contains this gadget in its entirety.This part is equipped with an IC of type BI-DIRECTIONAL FIFO memory.FIFO memory chips may be operated at very low supply voltages, such as 3V volts.The FIFO memory chip is capable of handling maximum supply voltages of 3.6V volts.There are a total of 64 pins on this FIFO memory IC.A frequency of 100MHz is sufficient to maintain good accuracy.A FIFO memory's maximum value of 100MHz can be used for regular operation.
72V801L10PFG Features
FIFOs category
Frequency at most
72V801L10PFG Applications
There are a lot of Integrated Device Technology (IDT) 72V801L10PFG FIFOs Memory applications.
- Wireless
- Data
- Test Equipment
- Computers
- SPD for DDR3 Memory Modules
- Address mapping
- Extended product-change notification
- Industrial Systems
- Consumer Systems
- General Data Collection Applications at Low-Temperatures
