72V801L10PFG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2008 |
| Part Status | Active |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Frequency | 100MHz |
| Operating Supply Voltage | 3.3V |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Direction | Bidirectional |
| Density | 4.5 kb |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Bus Directional | Bidirectional |
| Retransmit Capability | No |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72V801L10PFG8 Overview
FIFO memory chip is included in the TQFP package.Mounting it Surface Mount is recommended.64 pins are used for operation.For its operation, 40mA is the maximum current required.A voltage of 3.3V should be used for FIFO's maximum efficiency.This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.FIFO may operate at very low supply voltages, such as 3V volts.This FIFO memory chip can handle maximum supply voltages of 3.6V volts.In the presence of a 100MHz frequency, it can maintain good accuracy.For regular operation, the memory logic's maximum value is 100MHz .
72V801L10PFG8 Features
Frequency at most
72V801L10PFG8 Applications
There are a lot of Integrated Device Technology (IDT) 72V801L10PFG8 FIFOs Memory applications.
- Portable Information Devices
- Temporary storage elements
- Measurement Equipment
- Communications
- Extended product-change notification
- Buses
- Network switching/routing
- SPI Bus Flash Memory Devices
- Code converters
- Cameras
