72V801L10TF
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 256X9 |
| Density | 4.5 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V801L10TF Overview
The LQFP package contains FIFO memory chip.A Surface Mount mounting method is recommended.An input voltage of 3.3V results in high efficiency.As a result of this, FIFO means contains 64 terminations.Operation pins are 64 .In order to operate it, it requires 40mA volts of current.FIFO is recommended that the supply voltage be set to 3.3V for maximum efficiency.It operates at 0°C degrees Celsius to ensure reliability.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.It is self-contained in FIFOs .The IC of the part is of the type OTHER FIFO .It is possible to operate the FIFO memory chip at very low supply voltages, such as 3V volts.FIFO memory can handle a maximum supply voltage of 3.6V volts.The FIFO memory IC is equipped with a total of 64 pins.It maintains good accuracy at a 100MHz frequency.It is recommended that the FIFO memory's maximum value be set to 100MHz .
72V801L10TF Features
FIFOs category
Frequency at most
72V801L10TF Applications
There are a lot of Integrated Device Technology (IDT) 72V801L10TF FIFOs Memory applications.
- Data-acquisition systems
- Analog-to-digital converters
- Alarm System
- Network bridges
- Signal processing
- HDD
- Buses
- Battery Charger
- Portable Information Devices
- Consumer
