72V801L15PFGI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2001 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 256X9 |
| Density | 4.5 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | BI-DIRECTIONAL FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72V801L15PFGI8 Overview
TQFP is the package in which FIFO memory chip is contained.The package comes in a case of Tape & Reel .A Surface Mount mounting method is recommended.A supply voltage of 3.3V is capable of producing high efficiency.FIFO means contains a total of 64 terminations.There are 64 pins for operation.For its operation, 40mA is the maximum current required.A voltage of 3.3V should be used for FIFO's maximum efficiency.For reliability, FIFO works at a minimum temperature of -40°C degrees Celsius.The stable operation is enabled by the memory logic's maximum operating temperature of 85°C °C.FIFOs contains this gadget in its entirety.ICs of type BI-DIRECTIONAL FIFO are used in the FIFO memory chip.Typically, FIFO would work at 3V volts, but it may also work at higher voltages.There is a maximum supply voltage of 3.6V volts that FIFO memory can handle.The FIFO memory IC has a total of 64 pins.With a frequency of 66.7MHz , it maintains good accuracy.During normal operation, the FIFO memory's maximum value is 66.7MHz .
72V801L15PFGI8 Features
FIFOs category
Frequency at most
72V801L15PFGI8 Applications
There are a lot of Integrated Device Technology (IDT) 72V801L15PFGI8 FIFOs Memory applications.
- Communications
- IP Radio
- GPS Offender Tracking
- Signal processing
- High-speed graphics pixel buffer
- Controlled baseline
- Tape controllers
- Networking
- Magnetic memories
- Thermal Management for DDR3 Memory Modules
