72V801L15PFI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2005 |
| Part Status | Active |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Frequency | 66.7MHz |
| Operating Supply Voltage | 3.3V |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Density | 4.5 kb |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V801L15PFI8 Overview
This package is included in TQFP .Surface Mount is recommended as the mounting method.These are the 64 pins for operation.In order for FIFO design to operate, FIFO design requires a maximum current of 40mA .For FIFO's maximum efficiency, the supply voltage should be set to 3.3V .During operation, a minimum temperature of -40°C degrees Celsius should be maintained in order to ensure reliability.85°C °C is the memory logic's maximum operating temperature that allows stable operation.In some cases, FIFO operates at a very low supply voltage, such as 3V V.This FIFO memory chip can handle maximum supply voltages of 3.6V volts.With a frequency of 66.7MHz , it maintains good accuracy.During normal operation, the FIFO memory's maximum value is 66.7MHz .
72V801L15PFI8 Features
Frequency at most
72V801L15PFI8 Applications
There are a lot of Integrated Device Technology (IDT) 72V801L15PFI8 FIFOs Memory applications.
- Magnetic memories
- Microprogramming
- Industrial Systems
- Desktop Computers
- Application that requires re-writable nonvolatile parameter memory
- Digital buffering
- Tape controllers
- High-speed graphics pixel buffer
- Communications
- SPI Bus Flash Memory Devices
