72V801L20TF
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Organization | 256X9 |
| Density | 4.5 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V801L20TF Overview
LQFP is the package in which FIFO memory chip is contained.A Surface Mount mounting method is recommended.With a supply voltage of 3.3V volts, high efficiency is possible.I found that it has 64 terminations in FIFO means.As far as the operation pins are concerned, they are 64 pins.In order to operate FIFO design, a maximum current of 40mA is required.In order to maximize efficiency, the supply voltage should be set to 3.3V .For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.In FIFOs , there is a self-contained gadget.A OTHER FIFO memory type IC is used in the part.The FIFO memory chip may be operated at very low supply voltages, such as3V volts.An input voltage of 3.6V V is the maximum that FIFO memory can handle.It has a total of 64 pins on it.Despite a frequency of 50MHz , it is capable of maintaining good accuracy.The memory logic's maximum value is 50MHz for regular operation.
72V801L20TF Features
FIFOs category
Frequency at most
72V801L20TF Applications
There are a lot of Integrated Device Technology (IDT) 72V801L20TF FIFOs Memory applications.
- Cameras
- Switches
- One assembly
- Controlled baseline
- MP3 Interface for Automobile
- IP Camera Buffer
- Network bridges
- Smart Meter
- Disk Controllers
- GPS Offender Tracking
