72V801L20TF8
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Organization | 256X9 |
| Density | 4.5 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V801L20TF8 Overview
You can find FIFO memory chip in the LQFP package.It's packaged in the shape of a Tape & Reel .Mounting it Surface Mount is recommended.When the supply voltage is 3.3V , high efficiency is possible.64 terminations are contained in FIFO means.There are 64 pins for operation.In order to operate it, it requires 40mA volts of current.When setting the supply voltage to 3.3V , you will achieve FIFO's maximum efficiency.FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.It is self-contained in FIFOs .There is a memory type OTHER FIFO in the IC of this part.Typically, FIFO would work at 3V volts, but it may also work at higher voltages.A maximum voltage of 3.6V volts can be applied to FIFO memory.There are a total of 64 pins on this FIFO memory IC.A frequency of 50MHz is sufficient to maintain good accuracy.During regular operation, the FIFO memory's maximum value is 50MHz .
72V801L20TF8 Features
FIFOs category
Frequency at most
72V801L20TF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V801L20TF8 FIFOs Memory applications.
- GPS Offender Tracking
- Measurement Equipment
- Data-acquisition systems
- Laser Receiver System
- TVs
- General Data Collection Applications at Extreme High-Temperatures
- Digital buffering
- Test Equipment
- Buses
- Thermal Management for DDR3 Memory Modules
