72V805L10PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Pin Count | 128 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 256X18 |
| Density | 9 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V805L10PF Overview
FIFO memory chip is included in the TQFP package.The recommended mounting way is Surface Mount .If the supply voltage is set to 3.3V , high efficiency can be achieved.In FIFO means, there are 128 terminations.Operation pins are 128 .For its operation, 60mA is the maximum current required.A 3.3V supply voltage will ensure FIFO's maximum efficiency.In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.70°C °C is the memory logic's maximum operating temperature that allows stable operation.It is contained within FIFOs .In this part, the memory type is OTHER FIFO .Low supply voltages, such as 3V V, may be required for operation.An input voltage of 3.6V V is the maximum that FIFO memory can handle.The FIFO memory IC is equipped with a total of 128 pins.It maintains good accuracy at a 100MHz frequency.The memory logic's maximum value is 100MHz for regular operation.
72V805L10PF Features
FIFOs category
Frequency at most
72V805L10PF Applications
There are a lot of Integrated Device Technology (IDT) 72V805L10PF FIFOs Memory applications.
- Alarm System
- Controlled baseline
- Game Controller
- Desktop Computers
- Laser Receiver System
- Switches
- Portable Information Devices
- General Data Collection Applications at Low-Temperatures
- Multimedia
- Test site
