72V805L10PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Packaging | Tape & Reel |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Pin Count | 128 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 256X18 |
| Density | 9 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V805L10PF8 Overview
FIFO memory chip is contained in the TQFP package.Tape & Reel case is used for packaging.Mounting it Surface Mount is recommended.It is possible to achieve high efficiency with a supply voltage of 3.3V .FIFO means contains 128 terminations.As far as the operation pins are concerned, they are 128 pins.FIFO design requires a maximum current of 60mA to operate.For FIFO's maximum efficiency, the supply voltage should be set to 3.3V .It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.In FIFOs , this gadget is self-contained.It has a OTHER FIFO memory type IC.There is a possibility that FIFO can operate at very low supply voltages, such as 3V V.The memory logic's maximum supply voltage is 3.6V volts.There are a total of 128 pins on this board.A frequency of 100MHz is capable of maintaining good accuracy.Regular operation has a FIFO memory's maximum value of 100MHz .
72V805L10PF8 Features
FIFOs category
Frequency at most
72V805L10PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V805L10PF8 FIFOs Memory applications.
- Industrial Systems
- Emulators
- IP Camera Buffer
- Alarm System
- Portable Information Devices
- Magnetic memories
- Data-acquisition systems
- Seismic Data Collection at Extreme Temperatures
- Network switching/routing
- Medical Monitoring Device
