72V805L15PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Pin Count | 128 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 256X18 |
| Density | 9 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V805L15PF Overview
You can find FIFO memory chip in package TQFP .The recommended mounting method for this FIFO products is Surface Mount .A supply voltage of 3.3V allows for high efficiency.A total of 128 terminations can be found in FIFO means.128 pins are the operation pins.For its operation, 60mA is the maximum current required.In order to maximize efficiency, the supply voltage should be set to 3.3V .This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.A self-contained gadget is contained within FIFOs .ICs of type OTHER FIFO are used in the FIFO memory chip.There is a possibility that FIFO may operate at a very low supply voltage, such as 3V V.The memory logic's maximum supply voltage is 3.6V volts.The FIFO memory IC has a total of 128 pins.Despite a frequency of 66.7MHz , it is capable of maintaining good accuracy.For regular operation, the memory logic's maximum value is 66.7MHz .
72V805L15PF Features
FIFOs category
Frequency at most
72V805L15PF Applications
There are a lot of Integrated Device Technology (IDT) 72V805L15PF FIFOs Memory applications.
- Consumer Systems
- Consumer
- Game Controller
- Network switching/routing
- Seismic Data Collection at Extreme Temperatures
- High-speed graphics pixel buffer
- Video Processing
- Routers
- Analog-to-digital converters
- High-speed disk
