72V805L20PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Published | 2014 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 50MHz |
| Pin Count | 128 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Organization | 256X18 |
| Density | 9 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V805L20PF Overview
You will find FIFO memory chip in the TQFP package.A Surface Mount mounting method is recommended.It is possible to achieve high efficiency with a supply voltage of 3.3V .FIFO means contains a total of 128 terminations.The operation pins are 128 pins.In order to operate FIFO design, a maximum current of 60mA is required.Set the supply voltage to 3.3V to ensure FIFO's maximum efficiency.During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.The gadget is self-contained and can be found in FIFOs .ICs of type OTHER FIFO are used in the FIFO memory chip.In some cases, FIFO operates at a very low supply voltage, such as 3V V.FIFO memory is capable of handling a maximum supply voltage of 3.6V volts.A total of 128 pins are present on the FIFO memory IC.A frequency of 50MHz is capable of maintaining good accuracy.For regular operation, the memory logic's maximum value is 50MHz .
72V805L20PF Features
FIFOs category
Frequency at most
72V805L20PF Applications
There are a lot of Integrated Device Technology (IDT) 72V805L20PF FIFOs Memory applications.
- Controlled baseline
- SPI Bus Flash Memory Device
- General Data Collection Applications at Extreme High-Temperatures
- Routers
- Cameras
- Down-Hole Energy Drilling
- GPS Offender Tracking
- Rate buffers
- High-speed graphics pixel buffer
- Desktop Computers
