72V805L20PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Packaging | Tape & Reel |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 50MHz |
| Pin Count | 128 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Organization | 256X18 |
| Density | 9 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V805L20PF8 Overview
The TQFP package contains FIFO memory chip.There is a case Tape & Reel in which it is packaged.The recommended mounting method for this FIFO products is Surface Mount .A supply voltage of 3.3V allows for high efficiency.As a result of this, FIFO means contains 128 terminations.128 pin is used for operation.FIFO design requires 60mA amps of current to operate.Set the supply voltage to 3.3V to ensure FIFO's maximum efficiency.This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.70°C °C is the memory logic's maximum operating temperature that allows stable operation.FIFOs contains this gadget in its entirety.A OTHER FIFO memory type IC is used in the part.Low supply voltages, such as 3V V, may be required for operation.This FIFO memory chip can handle maximum supply voltages of 3.6V volts.The FIFO memory IC is equipped with a total of 128 pins.When the frequency is set to 50MHz it can maintain good accuracy.During regular operation, the FIFO memory's maximum value is 50MHz .
72V805L20PF8 Features
FIFOs category
Frequency at most
72V805L20PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V805L20PF8 FIFOs Memory applications.
- Battery Charger
- Portable Information Devices
- Cardiac Monitoring Device
- General Data Collection Applications at Low-Temperatures
- Video
- Disk Controllers
- Alarm System
- SPI Bus Flash Memory Device
- General Data Collection Applications at Extreme High-Temperatures
- Product traceability
