72V811L10PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 512X9 |
| Density | 9 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V811L10PF8 Overview
FIFO memory chip can be found in the TQFP package.The recommended mounting method for this FIFO products is Surface Mount .When the supply voltage is 3.3V , high efficiency is possible.I found that it has 64 terminations in FIFO means.There are 64 pins for operation.In order to operate it, it requires 40mA volts of current.Set the supply voltage to 3.3V to ensure FIFO's maximum efficiency.This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.FIFOs contains this gadget in its entirety.The IC of the part is OTHER FIFO memory type.If the supply voltage is very low, such as 3V V, FIFO may be able to operate.FIFO memory can handle a maximum supply voltage of 3.6V volts.There are a total of 64 pins on this board.It maintains good accuracy at a 100MHz frequency.For regular operation, the memory logic's maximum value is 100MHz .
72V811L10PF8 Features
FIFOs category
Frequency at most
72V811L10PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V811L10PF8 FIFOs Memory applications.
- Cameras
- Address mapping
- IP Camera Buffer
- Video Processing
- Network bridges
- Application that requires re-writable nonvolatile parameter memory
- Down-Hole Energy Drilling
- Digital buffering
- Microprogramming
- Multimedia
