72V811L10TFG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Data Bus Width | 9b |
| Organization | 512X9 |
| Density | 9 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | BI-DIRECTIONAL FIFO |
| Bus Directional | Bidirectional |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72V811L10TFG Overview
The TQFP package contains FIFO memory chip.It is pointing in the direction of Surface Mount .A supply voltage of 3.3V allows for high efficiency.I found that it has 64 terminations in FIFO means.64 pin is used for operation.FIFO requires a minimum of 40mA current to operate.A supply voltage of 3.3V is recommended for FIFO's maximum efficiency.For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.A self-contained gadget is contained in FIFOs .It has a BI-DIRECTIONAL FIFO memory type IC.FIFO memory chips may be operated at very low supply voltages, such as 3V volts.There is a maximum supply voltage of 3.6V volts that FIFO memory can handle.Approximately 64 pins are attached to it.A frequency of 100MHz is sufficient to maintain good accuracy.There is 100MHz FIFO memory IC's maximum value for regular operation.
72V811L10TFG Features
FIFOs category
Frequency at most
72V811L10TFG Applications
There are a lot of Integrated Device Technology (IDT) 72V811L10TFG FIFOs Memory applications.
- Emulators
- Magnetic memories
- MP3 Interface for Automobile
- Programmable Logic Controller
- Buses
- Thermal Management for DDR3 Memory Modules
- Tape controllers
- Seismic Data Collection at Extreme Temperatures
- SPD for DDR3 Memory Modules
- Telecommunication
