72V811L10TFG8
| Parameters | |
|---|---|
| Data Bus Width | 9b |
| Density | 9 kb |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Bus Directional | Bidirectional |
| Programmable Flags Support | Yes |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Published | 2008 |
| Part Status | Discontinued |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Frequency | 100MHz |
| Operating Supply Voltage | 3.3V |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
72V811L10TFG8 Overview
FIFO memory chip can be found in the LQFP package.Memory IC's recommended mounted way is Surface Mount .Operation pins are 64 .In order for FIFO design to operate, a maximum current of 40mA is required.The supply voltage should be set to 3.3V in order to achieve FIFO's maximum efficiency.In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.It is possible to operate the FIFO memory chip at very low supply voltages, such as 3V volts.A maximum supply voltage of 3.6V volts can be handled by the FIFO memory chip.In the presence of a 100MHz frequency, it can maintain good accuracy.There is 100MHz FIFO memory IC's maximum value for regular operation.
72V811L10TFG8 Features
Frequency at most
72V811L10TFG8 Applications
There are a lot of Integrated Device Technology (IDT) 72V811L10TFG8 FIFOs Memory applications.
- Transistors
- Consumer Systems
- Network switching/routing
- Computer Systems
- HDD
- Data
- SPD for DDR3 Memory Modules
- Cardiac Monitoring Device
- MP3 Interface for Automobile
- Switches
