72V811L15PFI8
| Parameters | |
|---|---|
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 512X9 |
| Density | 9 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
72V811L15PFI8 Overview
You can find FIFO memory chip in the TQFP package.It comes in a Tape & Reel package.Mounting it in the Surface Mount way is recommended.When the supply voltage is 3.3V , high efficiency is possible.The number of terminations in FIFO means is 64 .In the case of the operation pins, they are 64 pins.In order to operate it, it requires 40mA volts of current.A 3.3V supply voltage will ensure FIFO's maximum efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of -40°C degrees Celsius.As a result of having a maximum operating temperature of 85°C degrees Celsius, the unit is capable of exhibiting stable operation.In FIFOs , there is a self-contained gadget.This part is equipped with an IC of type OTHER FIFO memory.It is possible to operate the FIFO memory chip at very low supply voltages, such as 3V volts.FIFO memory can handle a maximum supply voltage of 3.6V V.This FIFO memory IC is equipped with 64 pins in total.When the frequency is set to 66.7MHz it can maintain good accuracy.A FIFO memory's maximum value of 66.7MHz can be used for regular operation.
72V811L15PFI8 Features
FIFOs category
Frequency at most
72V811L15PFI8 Applications
There are a lot of Integrated Device Technology (IDT) 72V811L15PFI8 FIFOs Memory applications.
- Event Recorder
- Multi-stage synchronizer
- Programmable Logic Controller
- Seismic Data Collection at Extreme Temperatures
- Test Equipment
- MP3 Interface for Automobile
- Firmware loaders
- SPD for DDR3 Memory Modules
- High-speed graphics pixel buffer
- Address mapping
