72V811L15TF8
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 512X9 |
| Density | 9 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V811L15TF8 Overview
FIFO memory chip is included in the LQFP package.This FIFO memory chip is packaged as a Tape & Reel .It is recommended that memory IC be mounted in the Surface Mount direction.If the supply voltage is set to 3.3V , high efficiency can be achieved.In FIFO means, there are 64 terminations.There are 64 pins on the operation pins.For its operation, 40mA is the maximum current required.A supply voltage of 3.3V is recommended for FIFO's maximum efficiency.It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.70°C °C is the memory logic's maximum operating temperature that allows stable operation.A self-contained gadget is contained in FIFOs .In this part, the memory type is OTHER FIFO .In some cases, FIFO operates at a very low supply voltage, such as 3V V.A maximum voltage of 3.6V volts can be applied to FIFO memory.There are a total of 64 pins on this board.With a frequency of 66.7MHz , it maintains good accuracy.Normally, the FIFO memory's maximum value is 66.7MHz .
72V811L15TF8 Features
FIFOs category
Frequency at most
72V811L15TF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V811L15TF8 FIFOs Memory applications.
- HDD
- Multi-stage synchronizer
- SPD for DDR3 Memory Modules
- Event Recorder
- Video Processing
- Tape controllers
- Communications Systems
- Measurement Equipment
- Seismic Data Collection at Extreme Temperatures
- One assembly
