72V811L20PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Organization | 512X9 |
| Density | 9 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V811L20PF Overview
FIFO memory chip can be found in the TQFP package.A Surface Mount mounting method is recommended.A supply voltage of 3.3V is capable of producing high efficiency.FIFO consists of 64 terminations, which indicates that FIFO means is empty.64 pins are used for operation.Its maximum operating current is 40mA .FIFO is recommended that the supply voltage be set to 3.3V in order to maximize efficiency.In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.In FIFOs , this gadget is self-contained.The IC of the part is OTHER FIFO memory type.If the supply voltage is very low, such as 3V V, FIFO may be able to operate.FIFO memory is capable of handling a maximum supply voltage of 3.6V volts.A total of 64 pins are present on the FIFO memory IC.With a frequency of 50MHz , it maintains good accuracy.The memory logic's maximum value is 50MHz for regular operation.
72V811L20PF Features
FIFOs category
Frequency at most
72V811L20PF Applications
There are a lot of Integrated Device Technology (IDT) 72V811L20PF FIFOs Memory applications.
- HDD
- Firmware loaders
- Video time base correction
- Measurement Equipment
- Extended product life cycle
- Event Recorder
- Laser Receiver System
- Telecommunication
- Video
- One assembly
