72V815L15PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Pin Count | 128 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 512X18 |
| Density | 18 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V815L15PF Overview
TQFP is a package that contains FIFO memory chip.The recommended mounting way is Surface Mount .If the supply voltage is set to 3.3V , high efficiency can be achieved.A total of 128 terminations can be found in FIFO means.Operation pins are 128 .In order to operate it, it requires 60mA volts of current.When setting the supply voltage to 3.3V , you will achieve FIFO's maximum efficiency.In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.The gadget is self-contained and can be found in FIFOs .It has a type OTHER FIFO memory IC.If the supply voltage is very low, such as 3V V, FIFO may be able to operate.The memory logic's maximum supply voltage is 3.6V volts.The FIFO memory IC has a total of 128 pins.It is capable of maintaining good accuracy with a frequency of 66.7MHz .During regular operation, 66.7MHz is the FIFO memory's maximum value.
72V815L15PF Features
FIFOs category
Frequency at most
72V815L15PF Applications
There are a lot of Integrated Device Technology (IDT) 72V815L15PF FIFOs Memory applications.
- TVs
- Seismic Data Collection at Extreme Temperatures
- Measurement Equipment
- Network bridges
- Signal processing
- MP3 Interface for Automobile
- Alarm System
- Telecommunication
- Emulators
- GPS Offender Tracking
