72V815L20PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 50MHz |
| Pin Count | 128 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Organization | 512X18 |
| Density | 18 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V815L20PF Overview
The TQFP package contains FIFO memory chip.It is recommended that memory IC be mounted in the Surface Mount direction.When the supply voltage is 3.3V , high efficiency is possible.As a result of this, FIFO means contains 128 terminations.There are 128 pins on the operation pins.In order to operate it, it requires 60mA volts of current.The supply voltage should be set to 3.3V in order to achieve FIFO's maximum efficiency.Keeping the temperature at 0°C degrees Celsius ensures its reliability.Its maximum operating temperature of 70°C °C ensures stable operation.It is self-contained in FIFOs .This part is equipped with an IC of type OTHER FIFO memory.Low supply voltages, such as 3V V, may be required for operation.A maximum supply voltage of 3.6V volts can be handled by the FIFO memory chip.It has a total of 128 pins on it.A frequency of 50MHz is sufficient to maintain good accuracy.A FIFO memory's maximum value of 50MHz can be used for regular operation.
72V815L20PF Features
FIFOs category
Frequency at most
72V815L20PF Applications
There are a lot of Integrated Device Technology (IDT) 72V815L20PF FIFOs Memory applications.
- Seismic Data Collection at Extreme Temperatures
- Programmable Logic Controller
- Routers
- Thermal Management for DDR3 Memory Modules
- SPI Bus Flash Memory Device
- Laser Receiver System
- Multimedia
- Emulators
- Tape controllers
- Address mapping
