72V815L20PF8
| Parameters | |
|---|---|
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Packaging | Tape & Reel |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 50MHz |
| Pin Count | 128 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Organization | 512X18 |
| Density | 18 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
72V815L20PF8 Overview
The TQFP package contains FIFO memory chip.This FIFO memory chip is packaged as a Tape & Reel .Memory IC's recommended mounted way is Surface Mount .When the supply voltage is 3.3V there is the possibility of high efficiency.In FIFO means, there are 128 terminations.Operation pins are 128 .For its operation, 60mA is the maximum current required.When setting the supply voltage to 3.3V , you will achieve FIFO's maximum efficiency.FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.A self-contained gadget is contained within FIFOs .This part has a memory type of OTHER FIFO .Low supply voltages, such as 3V V, may be required for operation.A maximum voltage of 3.6V volts can be applied to FIFO memory.The FIFO memory IC is equipped with a total of 128 pins.With a frequency of 50MHz , it maintains good accuracy.The memory logic's maximum value is 50MHz for regular operation.
72V815L20PF8 Features
FIFOs category
Frequency at most
72V815L20PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V815L20PF8 FIFOs Memory applications.
- Tape controllers
- Fabrication Site
- Telecommunication
- Signal processing
- Routers
- Test site
- One assembly
- Queues for communication systems
- Wireless
- Optical memories
