72V821L10TF
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 1KX9 |
| Density | 18 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V821L10TF Overview
TQFP is a package that contains FIFO memory chip.Mounting it Surface Mount is recommended.When the supply voltage is 3.3V , high efficiency is possible.64 terminations are contained in FIFO means.FIFO design has 64 operation pins.FIFO design requires a maximum current of 40mA to operate.FIFO is recommended that the supply voltage be set to 3.3V for maximum efficiency.It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.It is self-contained in FIFOs .ICs of type OTHER FIFO are used in the FIFO memory chip.Typically, FIFO would work at 3V volts, but it may also work at higher voltages.FIFO memory is capable of handling a maximum supply voltage of 3.6V volts.There are a total of 64 pins on this board.When the frequency is set to 100MHz it can maintain good accuracy.During regular operation, 100MHz is the FIFO memory's maximum value.
72V821L10TF Features
FIFOs category
Frequency at most
72V821L10TF Applications
There are a lot of Integrated Device Technology (IDT) 72V821L10TF FIFOs Memory applications.
- Video
- SPD for DDR3 Memory Modules
- Computer networks
- Address mapping
- Consumer Systems
- Test site
- SPI Bus Flash Memory Devices
- Optical memories
- Controlled baseline
- Wireless
