72V821L10TF8
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 1KX9 |
| Density | 18 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V821L10TF8 Overview
You can find FIFO memory chip in package LQFP .There's a Tape & Reel on the package.Memory IC's recommended mounted way is Surface Mount .An input voltage of 3.3V results in high efficiency.FIFO means contains 64 terminations.In the case of the operation pins, they are 64 pins.The maximum current required for its operation is 40mA .The supply voltage should be set to 3.3V in order to achieve FIFO's maximum efficiency.For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.The gadget in FIFOs is self-contained.It has a type OTHER FIFO memory IC.FIFO may operate at a very low supply voltage, such as 3V V.An input voltage of 3.6V V is the maximum that FIFO memory can handle.There are a total of 64 pins on this FIFO memory IC.With a frequency of 100MHz , it maintains good accuracy.The memory logic's maximum value is 100MHz for regular operation.
72V821L10TF8 Features
FIFOs category
Frequency at most
72V821L10TF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V821L10TF8 FIFOs Memory applications.
- Communications Systems
- Buses
- Portable Information Devices
- Temporary storage elements
- Magnetic memories
- SPI Bus Flash Memory Devices
- Test Equipment
- Emulators
- IP Radio
- Computers
