72V821L15PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 1KX9 |
| Density | 18 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V821L15PF8 Overview
You can find FIFO memory chip in the TQFP package.In terms of packaging, it comes in Tape & Reel cases.A Surface Mount mounting method is recommended.Supply voltages of 3.3V are capable of achieving high efficiency.FIFO consists of 64 terminations, which indicates that FIFO means is empty.As far as the operation pins are concerned, they are 64 pins.FIFO design requires a maximum current of 40mA to operate.When setting the supply voltage to 3.3V , you will achieve FIFO's maximum efficiency.In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.As a result of having a maximum operating temperature of 70°C degrees Celsius, the unit is capable of exhibiting stable operation.A self-contained gadget is contained within FIFOs .It has a OTHER FIFO memory type IC.Typically, FIFO would work at 3V volts, but it may also work at higher voltages.FIFO memory is capable of handling a maximum supply voltage of 3.6V volts.There are a total of 64 pins on this board.It maintains good accuracy at a 66.7MHz frequency.Regular operation has a FIFO memory's maximum value of 66.7MHz .
72V821L15PF8 Features
FIFOs category
Frequency at most
72V821L15PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V821L15PF8 FIFOs Memory applications.
- Programmable Logic Controller
- SPI Bus Flash Memory Device
- Battery Charger
- Smart Meter
- Telecommunication
- Portable Information Devices
- Cardiac Monitoring Device
- Test Equipment
- Game Consoles
- Magnetic memories
