72V821L15TFI
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 1KX9 |
| Density | 18 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V821L15TFI Overview
You will find FIFO memory chip in the LQFP package.Mounting it Surface Mount is recommended.With a supply voltage of 3.3V volts, high efficiency is possible.I found that it has 64 terminations in FIFO means.The operation pins are 64 pins.In order to operate it, it requires 40mA volts of current.A 3.3V supply voltage will ensure FIFO's maximum efficiency.For reliability, FIFO works at a minimum temperature of -40°C degrees Celsius.By using a memory logic's maximum operating temperature of 85°C degrees Celsius, stable operation can be achieved.FIFOs contains this gadget in its entirety.This part is equipped with an IC of type OTHER FIFO memory.FIFO may operate at a very low supply voltage, such as 3V V.There is a maximum supply voltage of 3.6V volts that FIFO memory can handle.Currently, it has 64 pins.In spite of the frequency 66.7MHz , it is capable of maintaining a good level of accuracy.Normally, the FIFO memory's maximum value is 66.7MHz .
72V821L15TFI Features
FIFOs category
Frequency at most
72V821L15TFI Applications
There are a lot of Integrated Device Technology (IDT) 72V821L15TFI FIFOs Memory applications.
- IP Camera Buffer
- Programmable Logic Controller
- Data-acquisition systems
- SPD for DDR3 Memory Modules
- Alarm System
- Temporary storage elements
- Tape controllers
- Down-Hole Energy Drilling
- Thermal Management for DDR3 Memory Modules
- Video
