72V821L20PF
| Parameters | |
|---|---|
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Organization | 1KX9 |
| Density | 18 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
72V821L20PF Overview
You can find FIFO memory chip in the TQFP package.Surface Mount is recommended as the mounting method.Supply voltages of 3.3V are capable of achieving high efficiency.FIFO consists of 64 terminations, which indicates that FIFO means is empty.Operation pins are 64 .FIFO requires a minimum of 40mA current to operate.For FIFO's maximum efficiency, the supply voltage should be set to 3.3V .During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.FIFOs contains this gadget in its entirety.A OTHER FIFO memory type IC is used in the part.There is a possibility that FIFO can operate at very low supply voltages, such as 3V V.A maximum supply voltage of 3.6V V can be handled by this FIFO memory chip.It consists of a total of 64 pins.Despite a frequency of 50MHz , it is capable of maintaining good accuracy.It is recommended that the FIFO memory's maximum value be set to 50MHz .
72V821L20PF Features
FIFOs category
Frequency at most
72V821L20PF Applications
There are a lot of Integrated Device Technology (IDT) 72V821L20PF FIFOs Memory applications.
- Application that requires re-writable nonvolatile parameter memory
- MP3 Interface for Automobile
- Multimedia
- High-speed disk
- Multi-stage synchronizer
- GPS Offender Tracking
- HDD
- Transistors
- SPD for DDR3 Memory Modules
- IP Radio
