72V821L20TF
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Organization | 1KX9 |
| Density | 18 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V821L20TF Overview
FIFO memory chip is included in the LQFP package.Mounting it Surface Mount is recommended.A supply voltage of 3.3V allows for high efficiency.In FIFO means, there are 64 terminations.These are the 64 pins for operation.In order for FIFO design to operate, FIFO design requires a maximum current of 40mA .The supply voltage should be set to 3.3V in order to achieve FIFO's maximum efficiency.For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.There is a self-contained gadget within FIFOs .A OTHER FIFO type memory IC is present in the FIFO memory chip.Typically, FIFO would work at 3V volts, but it may also work at higher voltages.An input voltage of 3.6V V is the maximum that FIFO memory can handle.There are a total of 64 pins on this board.When the frequency is set to 50MHz , the system can maintain good accuracy.During regular operation, the FIFO memory's maximum value is 50MHz .
72V821L20TF Features
FIFOs category
Frequency at most
72V821L20TF Applications
There are a lot of Integrated Device Technology (IDT) 72V821L20TF FIFOs Memory applications.
- Multi-stage synchronizer
- Extended product-change notification
- Down-Hole Energy Drilling
- Networking
- Laser Receiver System
- Extended product life cycle
- Address mapping
- SPI Bus Flash Memory Devices
- Game Controller
- Video Processing
