72V825L20PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 50MHz |
| Pin Count | 128 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Organization | 1KX18 |
| Density | 36 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V825L20PF Overview
You will find FIFO memory chip in the TQFP package.Mounting it Surface Mount is recommended.When the supply voltage is 3.3V , high efficiency is possible.128 terminations are contained in FIFO means.Operation pins are 128 .In order to operate it, it requires 60mA volts of current.FIFO is recommended that the supply voltage be set to 3.3V in order to maximize efficiency.During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.There is a self-contained gadget within FIFOs .ICs of type OTHER FIFO are used in the FIFO memory chip.FIFO memory chips may be operated at very low supply voltages, such as 3V volts.This FIFO memory chip can handle maximum supply voltages of 3.6V volts.Approximately 128 pins are attached to it.In spite of the frequency 50MHz , it is capable of maintaining a good level of accuracy.A FIFO memory's maximum value of 50MHz can be used for regular operation.
72V825L20PF Features
FIFOs category
Frequency at most
72V825L20PF Applications
There are a lot of Integrated Device Technology (IDT) 72V825L20PF FIFOs Memory applications.
- GPS Offender Tracking
- SPD for DDR3 Memory Modules
- General Data Collection Applications at Extreme High-Temperatures
- Signal processing
- Video Processing
- Medical Monitoring Device
- Analog-to-digital converters
- Computers
- Networking
- Wireless
