72V825L20PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Packaging | Tape & Reel |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 50MHz |
| Pin Count | 128 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Organization | 1KX18 |
| Density | 36 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V825L20PF8 Overview
You can find FIFO memory chip in package TQFP .There's a Tape & Reel on the package.Surface Mount is memory IC's recommended mounting method.A supply voltage of 3.3V allows for high efficiency.A total of 128 terminations are contained within FIFO means.128 pins are used for operation.FIFO design requires 60mA amps of current to operate.FIFO is recommended that the supply voltage be set to 3.3V for maximum efficiency.FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.Its maximum operating temperature of 70°C °C ensures stable operation.This gadget is self-contained in?FIFOs .It has a OTHER FIFO memory type IC.There is a possibility that FIFO can operate at very low supply voltages, such as 3V V.A maximum voltage of 3.6V volts can be applied to FIFO memory.There are a total of 128 pins on this board.When the frequency is set to 50MHz it can maintain good accuracy.The memory logic's maximum value is 50MHz for regular operation.
72V825L20PF8 Features
FIFOs category
Frequency at most
72V825L20PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V825L20PF8 FIFOs Memory applications.
- Buses
- Communications
- Data
- SPI Bus Flash Memory Device
- IP Radio
- Signal processing
- Telecommunication
- Desktop Computers
- MP3 Interface for Automobile
- Data communications
