72V82L15PA8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 56 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 56 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 100mA |
| Max Supply Current | 100mA |
| Clock Frequency | 40MHz |
| Access Time | 15 ns |
| Organization | 1KX9 |
| Density | 18 kb |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Width | 6.1mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V82L15PA8 Overview
You will find FIFO memory chip in the TSSOP package.The recommended mounting way is Surface Mount .When the supply voltage is 3.3V , high efficiency is possible.FIFO consists of 56 terminations, which indicates that FIFO means is empty.There are 56 pins for operation.For its operation, 100mA is the maximum current required.A voltage of 3.3V should be used for FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.In FIFOs , there is a self-contained gadget.A OTHER FIFO memory type IC is used in the part.FIFO may operate at a very low supply voltage, such as 3V V.A maximum supply voltage of 3.6V volts can be handled by the FIFO memory chip.It consists of a total of 56 pins.This gadget can also generate RETRANSMIT .FIFO memory ICs run at a frequency of 40MHz .
72V82L15PA8 Features
FIFOs category
Clock frequency of 40MHz
72V82L15PA8 Applications
There are a lot of Integrated Device Technology (IDT) 72V82L15PA8 FIFOs Memory applications.
- Data-acquisition systems
- Network bridges
- Multimedia
- Event Recorder
- Data
- Cardiac Monitoring Device
- SPD for DDR3 Memory Modules
- Emulators
- SPI Bus Flash Memory Devices
- Network switching/routing
