72V82L20PA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 56 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 56 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 100mA |
| Max Supply Current | 100mA |
| Clock Frequency | 33MHz |
| Access Time | 20 ns |
| Direction | Bidirectional |
| Organization | 1KX9 |
| Density | 18 kb |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | YES |
| Cycle Time | 30 ns |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Width | 6.1mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V82L20PA Overview
You can find FIFO memory chip in package TSSOP .Mounting it Surface Mount is recommended.When the supply voltage is 3.3V , high efficiency is possible.56 terminations are contained in FIFO means.As far as the operation pins are concerned, they are 56 pins.The maximum current required for its operation is 100mA .In order to maximize efficiency, the supply voltage should be set to 3.3V .At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.It is self-contained in FIFOs .ICs of type OTHER FIFO are used in the FIFO memory chip.Typically, FIFO would work at 3V volts, but it may also work at higher voltages.A maximum supply voltage of 3.6V V can be handled by this FIFO memory chip.It has a total of 56 pins on it.Additionally, this FIFO memory can be used to generate RETRANSMIT .The FIFO memory IC is controlled by a clock with a frequency of 33MHz .
72V82L20PA Features
FIFOs category
Clock frequency of 33MHz
72V82L20PA Applications
There are a lot of Integrated Device Technology (IDT) 72V82L20PA FIFOs Memory applications.
- Temporary storage elements
- IP Radio
- Product traceability
- Computer networks
- High-speed disk
- MP3 Interface for Automobile
- One assembly
- Transistors
- Measurement Equipment
- High-speed graphics pixel buffer
