72V82L20PA8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 56 |
| Packaging | Tape & Reel |
| Published | 2006 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 56 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 100mA |
| Max Supply Current | 100mA |
| Clock Frequency | 33MHz |
| Access Time | 20 ns |
| Direction | Bidirectional |
| Organization | 1KX9 |
| Density | 18 kb |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | YES |
| Cycle Time | 30 ns |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Width | 6.1mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V82L20PA8 Overview
You can find FIFO memory chip in package TSSOP .There's a Tape & Reel on the package.Mounting it in Surface Mount is recommended.An input voltage of 3.3V results in high efficiency.FIFO means contains a total of 56 terminations.In the case of the operation pins, they are 56 pins.In order to operate it, it requires 100mA volts of current.When setting the supply voltage to 3.3V , you will achieve FIFO's maximum efficiency.It operates at 0°C degrees Celsius to ensure reliability.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.This gadget is self-contained in?FIFOs .A OTHER FIFO memory type IC is used in the part.There is a possibility that FIFO can operate at very low supply voltages, such as 3V V.A maximum voltage of 3.6V volts can be applied to FIFO memory.Currently, it has 56 pins.It is also possible to generate RETRANSMIT with the use of this FIFO memory.The FIFO memory IC runs at a frequency of 33MHz .
72V82L20PA8 Features
FIFOs category
Clock frequency of 33MHz
72V82L20PA8 Applications
There are a lot of Integrated Device Technology (IDT) 72V82L20PA8 FIFOs Memory applications.
- Test Equipment
- Extended product-change notification
- Switches
- High-speed disk
- Computer Systems
- IP Camera Buffer
- Desktop Computers
- Test site
- Application that requires re-writable nonvolatile parameter memory
- Computer networks
