72V831L10PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 2KX9 |
| Density | 36 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V831L10PF8 Overview
This package is included in TQFP .The recommended mounting way is Surface Mount .If the supply voltage is set to 3.3V , high efficiency can be achieved.I found that it has 64 terminations in FIFO means.In the case of the operation pins, they are 64 pins.There is a maximum current requirement of 40mA for its operation.Set the supply voltage to 3.3V to ensure FIFO's maximum efficiency.FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.This gadget is self-contained in?FIFOs .There is a memory type OTHER FIFO in the IC of this part.The FIFO memory chip may be operated at very low supply voltages, such as3V volts.FIFO memory can handle a maximum supply voltage of 3.6V volts.Currently, it has 64 pins.A frequency of 100MHz is capable of maintaining good accuracy.A FIFO memory's maximum value of 100MHz can be used for regular operation.
72V831L10PF8 Features
FIFOs category
Frequency at most
72V831L10PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V831L10PF8 FIFOs Memory applications.
- Magnetic memories
- PC peripheral
- Cameras
- Product traceability
- Computer Systems
- TVs
- Rate buffers
- Networking
- Portable Information Devices
- One assembly
