72V831L10PFG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2008 |
| Part Status | Active |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Frequency | 100MHz |
| Operating Supply Voltage | 3.3V |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Direction | Bidirectional |
| Density | 36 kb |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Bus Directional | Bidirectional |
| Retransmit Capability | No |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72V831L10PFG Overview
FIFO memory chip is included in the TQFP package.A Surface Mount mounting method is recommended.FIFO design has 64 operation pins.FIFO design requires 40mA amps of current to operate.A voltage of 3.3V should be used for FIFO's maximum efficiency.It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.FIFO memory chips may be operated at very low supply voltages, such as 3V volts.FIFO memory is capable of handling a maximum supply voltage of 3.6V volts.It maintains good accuracy at a 100MHz frequency.Normally, the FIFO memory's maximum value is 100MHz .
72V831L10PFG Features
Frequency at most
72V831L10PFG Applications
There are a lot of Integrated Device Technology (IDT) 72V831L10PFG FIFOs Memory applications.
- Measurement Equipment
- HDD
- Alarm System
- Data
- Buses
- Telecommunication
- Emulators
- Cardiac Monitoring Device
- SPI Bus Flash Memory Device
- Cameras
