72V831L10TFG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Data Bus Width | 9b |
| Organization | 2KX9 |
| Density | 36 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | BI-DIRECTIONAL FIFO |
| Bus Directional | Bidirectional |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72V831L10TFG Overview
You can find FIFO memory chip in the TQFP package.A Surface Mount mounting method is recommended.It is possible to achieve high efficiency with a supply voltage of 3.3V .FIFO means contains a total of 64 terminations.FIFO design has 64 operation pins.FIFO design requires 40mA amps of current to operate.For FIFO's maximum efficiency, the supply voltage should be set to 3.3V .FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.The gadget is self-contained and can be found in FIFOs .A BI-DIRECTIONAL FIFO type memory IC is present in the FIFO memory chip.If the supply voltage is very low, such as 3V V, FIFO may be able to operate.A maximum supply voltage of 3.6V volts can be handled by the FIFO memory chip.There are a total of 64 pins on this board.In the presence of a 100MHz frequency, it can maintain good accuracy.For regular operation, the memory logic's maximum value is 100MHz .
72V831L10TFG Features
FIFOs category
Frequency at most
72V831L10TFG Applications
There are a lot of Integrated Device Technology (IDT) 72V831L10TFG FIFOs Memory applications.
- Consumer
- One assembly
- Signal processing
- Code converters
- Buses
- Test site
- Character generators
- General Data Collection Applications at Extreme High-Temperatures
- Game Consoles
- Computers
