72V831L20PF8
| Parameters | |
|---|---|
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Organization | 2KX9 |
| Density | 36 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
72V831L20PF8 Overview
FIFO memory chip can be found in the TQFP package.Mounting it Surface Mount is recommended.When the supply voltage is 3.3V , high efficiency is possible.A total of 64 terminations are contained within FIFO means.The operation pins are 64 pins.For its operation, 40mA is the maximum current required.FIFO is recommended that the supply voltage be set to 3.3V in order to maximize efficiency.It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.The gadget in FIFOs is self-contained.A OTHER FIFO memory type IC is used in the part.FIFO memory chips may be operated at very low supply voltages, such as 3V volts.A maximum supply voltage of 3.6V V can be handled by this FIFO memory chip.It consists of a total of 64 pins.A frequency of 50MHz is sufficient to maintain good accuracy.A FIFO memory's maximum value of 50MHz can be used for regular operation.
72V831L20PF8 Features
FIFOs category
Frequency at most
72V831L20PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V831L20PF8 FIFOs Memory applications.
- Consumer
- MP3 Interface for Automobile
- Data-acquisition systems
- Alarm System
- Signal processing
- Networking
- Application that requires re-writable nonvolatile parameter memory
- General Data Collection Applications at Low-Temperatures
- IP Camera Buffer
- Video time base correction
