72V831L20TF
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Organization | 2KX9 |
| Density | 36 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V831L20TF Overview
The LQFP package contains FIFO memory chip.Memory IC's recommended mounted way is Surface Mount .A supply voltage of 3.3V is capable of producing high efficiency.FIFO consists of 64 terminations, which indicates that FIFO means is empty.64 pin is used for operation.FIFO requires a minimum of 40mA current to operate.For FIFO's maximum efficiency, the supply voltage should be set to 3.3V .To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.An operating temperature of 70°C °C is necessary for stable operation.There is a self-contained gadget within FIFOs .The IC of the part is OTHER FIFO memory type.FIFO may operate at a very low supply voltage, such as 3V V.A maximum voltage of 3.6V volts can be applied to FIFO memory.It consists of a total of 64 pins.In spite of the frequency 50MHz , it is capable of maintaining a good level of accuracy.Normally, the FIFO memory's maximum value is 50MHz .
72V831L20TF Features
FIFOs category
Frequency at most
72V831L20TF Applications
There are a lot of Integrated Device Technology (IDT) 72V831L20TF FIFOs Memory applications.
- Cameras
- Test Equipment
- One assembly
- Smart Meter
- Portable Information Devices
- Computers
- Disk Controllers
- Video time base correction
- MP3 Interface for Automobile
- Fabrication Site
