72V835L10PF
| Parameters | |
|---|---|
| Bus Directional | Bidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Pin Count | 128 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 2KX18 |
| Density | 72 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
72V835L10PF Overview
You can find FIFO memory chip in package TQFP .The recommended mounting method for this FIFO products is Surface Mount .High efficiency is possible with a supply voltage of 3.3V .A total of 128 terminations are contained within FIFO means.There are 128 pins for operation.There is a maximum current requirement of 60mA for its operation.When the supply voltage is set to 3.3V , the FIFO's maximum efficiency is achieved.For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.It is contained within FIFOs .This part has a memory type of OTHER FIFO .Low supply voltages, such as 3V V, may be required for operation.This FIFO memory chip can handle maximum supply voltages of 3.6V volts.The FIFO memory IC is equipped with a total of 128 pins.A frequency of 100MHz is sufficient to maintain good accuracy.A FIFO memory's maximum value of 100MHz can be used for regular operation.
72V835L10PF Features
FIFOs category
Frequency at most
72V835L10PF Applications
There are a lot of Integrated Device Technology (IDT) 72V835L10PF FIFOs Memory applications.
- Portable Information Devices
- GPS Offender Tracking
- Smart Meter
- Queues for communication systems
- Character generators
- MP3 Interface for Automobile
- Network bridges
- SPD for DDR3 Memory Modules
- Test site
- Extended product-change notification
