72V835L15PF
| Parameters | |
|---|---|
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Pin Count | 128 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 2KX18 |
| Density | 72 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
72V835L15PF Overview
FIFO memory chip is included in the TQFP package.It is pointing in the direction of Surface Mount .When the supply voltage is 3.3V , high efficiency is possible.As a result of this, FIFO means contains 128 terminations.There are 128 pins for operation.The maximum current required for its operation is 60mA .For FIFO's maximum efficiency, the supply voltage should be set to 3.3V .For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.The gadget in FIFOs is self-contained.A OTHER FIFO type memory IC is present in the FIFO memory chip.FIFO may operate at a very low supply voltage, such as 3V V.A maximum voltage of 3.6V volts can be applied to FIFO memory.The FIFO memory IC is equipped with a total of 128 pins.In the presence of a 66.7MHz frequency, it can maintain good accuracy.During normal operation, the FIFO memory's maximum value is 66.7MHz .
72V835L15PF Features
FIFOs category
Frequency at most
72V835L15PF Applications
There are a lot of Integrated Device Technology (IDT) 72V835L15PF FIFOs Memory applications.
- Test site
- TVs
- Desktop Computers
- Application that requires re-writable nonvolatile parameter memory
- SPI Bus Flash Memory Device
- Buses
- Look-up Tables
- High-speed disk
- Cameras
- Measurement Equipment
