72V835L15PFI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Pin Count | 128 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 2KX18 |
| Density | 72 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V835L15PFI Overview
TQFP is a package that contains FIFO memory chip.It is recommended that memory IC be mounted in the Surface Mount direction.High efficiency is possible with a supply voltage of 3.3V .FIFO means contains 128 terminations.128 pins are used for operation.In order to operate FIFO design, a maximum current of 60mA is required.For FIFO's maximum efficiency, the supply voltage should be set to 3.3V .It is designed to run at a minimum temperature of -40°C degrees Celsius to ensure reliability.By operating at a temperature of 85°C °C, the FIFO products is capable of stable operation.A self-contained gadget is contained in FIFOs .It has a type OTHER FIFO memory IC.If the supply voltage is very low, such as 3V V, FIFO may be able to operate.The FIFO memory chip is capable of handling maximum supply voltages of 3.6V volts.The FIFO memory IC has a total of 128 pins.When the frequency is set to 66.7MHz , the system can maintain good accuracy.There is 66.7MHz FIFO memory IC's maximum value for regular operation.
72V835L15PFI Features
FIFOs category
Frequency at most
72V835L15PFI Applications
There are a lot of Integrated Device Technology (IDT) 72V835L15PFI FIFOs Memory applications.
- Disk Controllers
- Industrial Systems
- Address mapping
- Programmable Logic Controller
- Computer Systems
- Portable Information Devices
- Controlled baseline
- High-speed disk
- Data
- IP Radio
