72V83L15PAG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 56 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 56 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 100mA |
| Max Supply Current | 100mA |
| Clock Frequency | 40MHz |
| Access Time | 15 ns |
| Direction | Bidirectional |
| Organization | 2KX9 |
| Density | 36 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | BI-DIRECTIONAL FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Width | 6.1mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72V83L15PAG8 Overview
FIFO memory chip is included in the TSSOP package.Mounting it in the Surface Mount way is recommended.When the supply voltage is 3.3V there is the possibility of high efficiency.FIFO consists of 56 terminations, which indicates that FIFO means is empty.Operation pins are 56 .Its maximum operating current is 100mA .Set the supply voltage to 3.3V to ensure FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.It is contained within FIFOs .A BI-DIRECTIONAL FIFO memory type IC is used in the part.FIFO may operate at very low supply voltages, such as 3V volts.An input voltage of 3.6V V is the maximum that FIFO memory can handle.There are a total of 56 pins on this FIFO memory IC.It is also possible to generate RETRANSMIT by using this FIFO memory.In this FIFO memory IC, the clock runs at frequency 40MHz .
72V83L15PAG8 Features
FIFOs category
Clock frequency of 40MHz
72V83L15PAG8 Applications
There are a lot of Integrated Device Technology (IDT) 72V83L15PAG8 FIFOs Memory applications.
- Alarm System
- Digital buffering
- Controlled baseline
- Fabrication Site
- Network switching/routing
- SPI Bus Flash Memory Device
- Smart Meter
- Buses
- Data
- Extended product-change notification
