72V83L20PA
| Parameters | |
|---|---|
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 56 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 100mA |
| Max Supply Current | 100mA |
| Clock Frequency | 33.3MHz |
| Access Time | 20 ns |
| Direction | Bidirectional |
| Organization | 2KX9 |
| Density | 36 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Programmable Flags Support | No |
| Output Enable | YES |
| Cycle Time | 30 ns |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Width | 6.1mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 56 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
72V83L20PA Overview
You can find FIFO memory chip in package TSSOP .It is pointing in the direction of Surface Mount .High efficiency is possible with a supply voltage of 3.3V .As a result of this, FIFO means contains 56 terminations.Operation pins are 56 .For its operation, 100mA is the maximum current required.For FIFO's maximum efficiency, the supply voltage should be set to 3.3V .At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.An operating temperature of 70°C °C is necessary for stable operation.The gadget in FIFOs is self-contained.This part is equipped with an IC of type OTHER FIFO memory.FIFO may operate at a very low supply voltage, such as 3V V.This FIFO memory chip can handle maximum supply voltages of 3.6V volts.Currently, it has 56 pins.Additionally, RETRANSMIT can be generated with this FIFO memory.The FIFO memory IC runs at a frequency of 33.3MHz .
72V83L20PA Features
FIFOs category
Clock frequency of 33.3MHz
72V83L20PA Applications
There are a lot of Integrated Device Technology (IDT) 72V83L20PA FIFOs Memory applications.
- Desktop Computers
- Product traceability
- Communications Systems
- Firmware loaders
- Medical Monitoring Device
- SPD for DDR3 Memory Modules
- Data
- Smart Meter
- Temporary storage elements
- Disk Controllers
