72V841L10PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2008 |
| Part Status | Active |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Frequency | 100MHz |
| Operating Supply Voltage | 3.3V |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Direction | Bidirectional |
| Density | 72 kb |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Bus Directional | Bidirectional |
| Retransmit Capability | No |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V841L10PF Overview
You can find FIFO memory chip in the TQFP package.Surface Mount is recommended as the mounting method.The operation pins are 64 pins.Its maximum operating current is 40mA .When setting the supply voltage to 3.3V , you will achieve FIFO's maximum efficiency.At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.An operating temperature of 70°C °C is necessary for stable operation.FIFO memory chips may be operated at very low supply voltages, such as 3V volts.A maximum supply voltage of 3.6V volts can be handled by the FIFO memory chip.With a frequency of 100MHz , it exhibits good accuracy.During regular operation, 100MHz is the FIFO memory's maximum value.
72V841L10PF Features
Frequency at most
72V841L10PF Applications
There are a lot of Integrated Device Technology (IDT) 72V841L10PF FIFOs Memory applications.
- Networking
- Battery Charger
- Disk Controllers
- Computer networks
- Fabrication Site
- Measurement Equipment
- Digital buffering
- Consumer
- Firmware loaders
- Event Recorder
