72V841L10PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 4KX9 |
| Density | 72 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V841L10PF8 Overview
FIFO memory chip is contained in the TQFP package.Memory IC's recommended mounted way is Surface Mount .High efficiency is possible with a supply voltage of 3.3V .FIFO means contains 64 terminations.There are 64 pins on the operation pins.FIFO design requires a maximum current of 40mA to operate.Set the supply voltage to 3.3V to ensure FIFO's maximum efficiency.This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.An operating temperature of 70°C °C is necessary for stable operation.It is self-contained in FIFOs .This part has a memory type of OTHER FIFO .There is a possibility that FIFO may operate at a very low supply voltage, such as 3V V.A maximum supply voltage of 3.6V volts can be handled by the FIFO memory chip.The FIFO memory IC has a total of 64 pins.A frequency of 100MHz is capable of maintaining good accuracy.Regular operation has a FIFO memory's maximum value of 100MHz .
72V841L10PF8 Features
FIFOs category
Frequency at most
72V841L10PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V841L10PF8 FIFOs Memory applications.
- Extended product-change notification
- Smart Meter
- Multi-stage synchronizer
- Address mapping
- MP3 Interface for Automobile
- Application that requires re-writable nonvolatile parameter memory
- Transistors
- Microprogramming
- Game Consoles
- Medical Monitoring Device
