72V841L10PFG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 4KX9 |
| Density | 72 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | BI-DIRECTIONAL FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72V841L10PFG Overview
TQFP is a package that contains FIFO memory chip.Mounting it in Surface Mount is recommended.An input voltage of 3.3V results in high efficiency.A total of 64 terminations can be found in FIFO means.There are 64 pins on the operation pins.Its maximum operating current is 40mA .When setting the supply voltage to 3.3V , you will achieve FIFO's maximum efficiency.For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.A self-contained gadget is contained within FIFOs .ICs of type BI-DIRECTIONAL FIFO are used in the FIFO memory chip.FIFO may operate at a very low supply voltage, such as 3V V.The FIFO memory chip is capable of handling maximum supply voltages of 3.6V volts.The FIFO memory IC has a total of 64 pins.It maintains good accuracy at a 100MHz frequency.Regular operation has a FIFO memory's maximum value of 100MHz .
72V841L10PFG Features
FIFOs category
Frequency at most
72V841L10PFG Applications
There are a lot of Integrated Device Technology (IDT) 72V841L10PFG FIFOs Memory applications.
- Digital buffering
- Data-acquisition systems
- Computer networks
- IP Camera Buffer
- Consumer Systems
- Battery Charger
- Character generators
- Thermal Management for DDR3 Memory Modules
- Portable Information Devices
- Communications Systems
