72V841L10PFG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 4KX9 |
| Density | 72 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | BI-DIRECTIONAL FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72V841L10PFG8 Overview
TQFP is a package that contains FIFO memory chip.Surface Mount is recommended as the mounting method.When the supply voltage is 3.3V , high efficiency is possible.The number of terminations in FIFO means is 64 .There are 64 pins on the operation pins.FIFO requires a minimum of 40mA current to operate.For FIFO's maximum efficiency, the supply voltage should be set to 3.3V .In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.This gadget is self-contained in?FIFOs .This part is equipped with an IC of type BI-DIRECTIONAL FIFO memory.Typically, FIFO would work at 3V volts, but it may also work at higher voltages.There is a maximum supply voltage of 3.6V volts that FIFO memory can handle.The FIFO memory IC has a total of 64 pins.In spite of the frequency 100MHz , it is capable of maintaining a good level of accuracy.During normal operation, the FIFO memory's maximum value is 100MHz .
72V841L10PFG8 Features
FIFOs category
Frequency at most
72V841L10PFG8 Applications
There are a lot of Integrated Device Technology (IDT) 72V841L10PFG8 FIFOs Memory applications.
- Consumer
- Routers
- Extended product life cycle
- Smart Meter
- Data
- Wireless
- Industrial Systems
- Switches
- Test site
- Test Equipment
